Sunroof Panel, Removing and Installing (Assembly Overview)

Sunroof Panel, Removing And Installing (assembly overview)







1 - Sliding headliner
- Only for vehicles with glass panel
- For vehicles with solar panel, slide into sunroof toward rear
- Detach headliner before removing
2 - Spring for sliding headliner
- Detach cover frame for molded headliner before removal.
- To remove, remove countersunk screw -7- at front and rear.
- Push front spring - 2 - forward and rear spring rearward, remove both from sliding headliner.
- Pull sliding headliner on opposite guide track out of side and lift out.
3 - Lower trim
4 - Upper trim

NOTE: For vehicles as of calendar week 27/2002, a boot is installed in place of upper/lower panel.

5 - Sunroof panel
- To remove, detach headliner
- Remove left and right panels.
- Remove Torx bolts (T 25) left and right at sunroof panel and lift out panel.
- Adjusting.
6 - Panel seal
- Removal.
7 - Countersunk screw
- 1.5 Nm.