Glove Compartment Cover

Glove Compartment Cover, Removing And Installing

Removing:
- Remove glove compartment.







- Press pin - 1 - out in - direction of arrow - at connection between brake for glove compartment cover - 2 - and glove compartment cover - 3 -.
- Open glove compartment cover.







There are holes on the inside of the glove compartment at the left and right by the hinge.
- Knock the pins - 2 - on left and right out of the glove compartment - 1 - using a drift (4 mm).

If there is no hole, proceed as follows:
- Pull pin - 2 - inward on left and right inward and remove using a pliers.
- Remove glove compartment cover.

Installing:
Installation is reverse of removal.