Crossmember For Bumper (Vehicles With Trailer Hitch), Removing and Installing

Crossmember for bumper (vehicles with trailer hitch), removing and installing

NOTE: Bumper cover removed.







1 - Trailer hitch carrier
2 - Bolt
- 60 Nm
- 4x
3 - Nut
- 23 Nm
- 2x
4 - Mounting clamps
- 4x
5 - Spacer
- 2x
6 - Bolt
- 23 Nm
- 2x
7 - Cross member







Threaded plate for trailer hitch

NOTE:
- Note the various mounting points for the threaded plate.
- - Arrow A - as of Vehicle Identification Number (VIN) 400 001
- - Arrow B - up to Vehicle Identification Number (VIN) 400 000

- Contact surface of threaded plate must be clean and even.
- Mount threaded plate - 1 - with pop rivets - 2 - starting from outside working toward inside.