Alarm Horn: Service and Repair

Alarm Horn H12, Removing And Installing

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

- Remove right interior trim.







- Remove nut -1 -.
- Disconnect electrical connection - 2 -.
- Remove horn - 3 -.
- If necessary, remove horn bracket - 5 - by removing bolt - 4 -.

Installing
Install in reverse order of removal, noting the following:
- Install trim.

Tightening torque

Component - fastener Nm
Alarm Horn H12 to bracket - nut 5
Bracket to body - bolt 9