Shift Interlock Cable: Adjustments

Locking cable, adjusting, 01J, CVT A/T FWD

Special tools, testers and auxiliary items required

Adjustment pin for shift lock 3 3352 A:

^ Protective glasses

Work preparations





Note:
^ The procedure described below will save the effort of removing the center console.

- Using a cutting grinder, cut through adjustment pin for shift lock 3 3352 A at rear end of flat area -arrow-

CAUTION: Wear protective glasses.

- Order a new adjustment pin for shift lock as a replacement for other use.

Work procedure





- Remove shift mechanism cover.
- Remove ashtray in center console.
- Loosen bolt -1-.
^ It should be possible to move support bracket -2- of locking cable by hand

- Insert adjustment pin for shift lock 3 3352 A between pin on locking cable lever and locking cable eye.
- Pull locking cable in direction of -arrow- and tighten bolt to 9 Nm.
- Remove adjusting gauge.
- Check ignition key removal lock after every adjustment of the locking cable.

Tightening Torque: