Malfunction Indicator Lamp (MIL) -K83- Checking

Malfunction Indicator Lamp (MIL) -K83- Checking

Checking function of control lamp
- Turn ignition on.
- The fault indicator for self diagnosis (MIL) must be turned on.
- Start engine.
- Shortly after starting engine, the MIL will turn off if there are no malfunctions stored in fault memory that affect exhaust emissions.

NOTE: The signal to turn on MIL is sent from ECM to instrument cluster via CAN-Bus communications. Data transfer between ECM and other CAN-able control modules. Data Exchange, Motronic (CAN-BUS), Checking