Roadster

Rear Cross Panel Trim, Removing And Installing







1 - Rear cross panel trim
- Pry off caps - 3 -.
- Remove screws - 2 - (2x).
- Open covers - 4 -.
- Remove bolts - 5 - (4x).
- Remove covers - 4 -.
- Vehicles with emergency release: Remove emergency release
- After assembling trim, make sure seal is properly installed.
2 - Bolts (2x)
- Tightening torque 2 Nm
3 - Caps
4 - Cover
5 - Bolts (4x)
- Tightening torque 4 Nm







Removing emergency release handle
- Remove cover - 1 -.
- Remove bolt - 3 -.
- Pull off handle - 2 -.