Hydraulic System, Assembly Overview

Hydraulic system, overview
1. Brake fluid reservoir
2. Supply hose
3. Master cylinder
4. Retainer Replace only with master cylinder removed Removing - Fig 1
^ Pressing on - Fig 2
5. Clutch pedal
6. Self - locking hexagon nut, 25 Nm
^ Always replace
7. O-ring
^ Cannot be replaced
^ If O-ring is damaged, replace the whole pipe/hose assembly
^ Lubricate with brake fluid when installing
8. Pipe/hose assembly
^ Allocate using Parts Supplier
9. Bracket
^ Secured to bodywork
10. Dust cap
11. Bleed valve
12. Slave cylinder
13. Collared securing bolt, 25 Nm
14. Transmission
15. Clip
16. O-ring
^ Cannot be replaced
^ If O-ring is damaged, replace the whole pipe/hose assembly
^ Lubricate with brake fluid when installing
17. Support bracket
18. Hose bracket
^ Secure to control cable/gear selector cable support bracket
19. Clip





Fig. 1 Lever retainer - A - off in direction of arrow





Fig. 2 Press master cylinder operating rod in retainer - A - in direction of arrow