Glove Box Lamp Switch: Service and Repair

CAUTION:
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Owners's Manual


Glove Box Light Switch, Removing And Installing

Removing
- Carefully pry off and remove instrument panel side trim on passenger's side using a flat-tipped screwdriver.







- Unplug connector-1-and terminals-2-.
- Press switch -3- out of instrument panel mounting in the direction indicated -arrow-.