All Wheel Drive (AWD) Vehicles

All Wheel Drive (AWD) vehicles







1 Sender for fuel gauge -G-
2 Fuel pump
- Check fuel pump
3 Seal
- replace
- to install, place into opening of fuel tank when dry
4 Fuel return line
- blue
- from fuel rail
- connects to connection with "R" marking at connector flange
- to remove from connector flange, press release button on connecting piece
5 Fuel supply line
- Black
- To fuel filter
- connects to connection with "V" marking at connector flange
- to remove from connector flange or from filter, press release button on connecting piece
6 Electrical 4-pin harness connector
- for Fuel Pump (FP) and Sender for fuel gauge -G- and Fuel Level Sensor 2 -G169-
7 Union nut -80 Nm
- Use ring nut spanner 3217 to remove and install
8 Electrical 2-pin harness connector
- For Fuel Level Sensor 2 -G169-
9 Union nut -80 Nm
- Use ring nut spanner 3217 to remove and install
10 Seal
- replace
- to install, place into opening of fuel tank when dry
11 Suction jet pump
- with connector flange
- With lines
12 Fuel Level Sensor 2 -G169-
13 Hose coupling
- for fuel hose to suction jet pump
- to disconnect, press release button
14 Retaining Strap
- for fuel hose of the suction jet pump
- hook in fuel pump and press into retainer