Sender For Fuel Gauge -G-, Removing and Installing

Sender for fuel gauge -G-, removing and installing

Removing
Observe safety precautions.
Observe rules for cleanliness.
^ Remove fuel pump.
^ Remove secondary fuel pump.





^ Disengage connector prongs of electrical wires -3- and -4- and disconnect.
^ Pry off retaining straps -1- and -2- using screwdriver and remove sender for fuel gauge toward bottom (arrow).

Installing
Installation is the reverse of removal, noting the following:
^ Insert sender for fuel gauge into guides at Fuel Pump (FP) and press up until engagement.
^ Insert connector prongs of electrical wires and check for proper engagement.
^ Install Fuel Pump.
^ Observe notes for connection of battery.