Fuel Pump and Sender For Fuel Gauge -G-, Component Overview

Fuel pump and Sender for fuel gauge -G-, component overview





1. Fuel pump
2. Seal
^ Always replace
^ To install, place into opening of fuel tank when dry.
3. Return line
^ Blue
^ From fuel rail
^ Attaches to connection with "R" marking at connector flange
^ To remove connector flange, press release button on connecting piece
4. Supply line
^ Black
^ To fuel filter
^ Attaches to connection with "V" marking at connector flange
^ To remove from connector flange or from filter, press release button on connecting piece.
5. 4-pin harness connector
^ For Fuel Pump (FP) and sender for fuel gauge -G
6. Union nut - 80 Nm
^ Use ring nut spanner 3217 to remove and install
7. Sender for fuel gauge -G