SID: Time Until Next Service (After Cluster Replacement)

SID: Time Remaining Until Next Inspection Service (after Replacing Instrument Cluster)

This function is used after replacing the instrument cluster to enter the time remaining (in days) before the next Inspection Service is due.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons 1 and 0 and confirm input with Q button.

Indicated on display:

Adaptation
Enter channel number XX

- Press buttons 4 and 1.
- Press -Q- button to confirm input

Channel 41 Adaptation 0 ->
<-13->

- Indicated on display: for new instrument cluster:

The time (in days) remaining before the next Inspection Service is due must be transferred from the old instrument cluster (e.g. 110 days = adaptation value 110).

NOTE:
- The number can be entered in steps of 1 day; the readout on the display will also be in steps of 1 day.
- The entered value is counted upward from 0 to 365 days.
- When replacing the instrument cluster, see notes.
- When using the button pad on the scan tool, the number must be entered directly.
- If an incorrect value is entered the adaptation function will be terminated and must be re-started.

- Press" button.

Indicated on display:

Channel 41 Adaptation 0
Enter adaptation value XXXXX

- Enter required value (noted from old unit) via button pad on scan tool, filling in the initial spaces with "O."

Example:

- Remaining time: 110 days
- Input value: 00110

Indicated on display (example only):

Channel 41 Adaptation 0 Q
Enter adaptation value 00110

- Press -Q- button to confirm input

Indicated on display:

Channel 41 Adaptation 110 Q
<-1 3->

- Press -Q- button to confirm input

Indicated on display:

Channel 41 Adaptation 110 Q
Store changed value?

- Press -Q- button to confirm input

Indicated on display:

Channel 41 Adaptation 110 ->
Changed value is stored

- Press -> button to terminate adaptation of service interval display.