SID: Maximum Time Interval, Adaptation

SID: Maximum Time Interval, Adaptation

This function stipulates a max. time interval in days for the SID.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -1- and -0- and confirm input with Q button.

Indicated on display:

Rapid data transfer Q
10 -Adaptation

- Press-Q- button to confirm input.

Indicated on display:

Adaptation
Enter channel number XX

- Press buttons -4- and -4- to access "channel 44".
- Press-Q- button to confirm input.

- Indicated on display: Display shows maximum time interval in days until the next service (here, e.g. 730 = 730 days).

Channel 44 Adaptation 730 ->
Max. value, inspection in 1 day < .1 3- >

NOTE:
- The value entered for the corresponding engine variation must correspond to value of table.
- Confirm maintenance intervals applicable to vehicle.
- The respective specified value can only be entered in steps of single days and the display is therefore also in days.
- When using the button pad on the scan tool, the number must be entered directly.
- If an incorrect value is entered adaptation function will be terminated and must be restarted.

- Press -> button.

- Indicated on display:

Channel 2 Adaptation 1
Enter adaptation value XXXXX

- Required value via scan tool button pad, filling in the initial spaces with "0"

Input value: e.g. 730 days

Entry via keypad: 00730

- Indicated on display:

Channel 44 Adaptation 730 Q
Enter adaptation value 00730

- Press-Q- button to confirm input.

- Indicated on display:

Channel 44 Adaptation 730 Q
Max. value, inspection in 1 day <-1 3->

- Press-Q- button to confirm input.

- Indicated on display:

Channel 44 Adaptation 730
Store changed value?

- Press-Q- button to confirm input.

- Indicated on display:

Channel 44 Adaptation 730 ->
Changed value is stored

- Press -> button to terminate adaptation of maximum time interval.