SID: Maximum Distance, Adaptation

SID: Maximum Distance, Adaptation

This function stipulates a minimum distance for the SID.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons 1 and 0 and confirm input with Q button.

Indicated on display:

Rapid data transfer Q
10 -Adaptation

- Press-Q- button to confirm input.

Indicated on display:

Adaptation
Enter channel number XX

- Press buttons 4 and 3.
- Press-Q- button to confirm input.

Indicated on display: Display shows maximum distance until the next service (here, e.g. 30 = 30,000 km).

Channel 43 Adaptation 30 ->
max-value, oil in 1000 km < -1 3- >

NOTE:
- The value entered for the corresponding engine variation must correspond to value of table.
- Confirm maintenance intervals applicable to vehicle.
- The distance must be entered in steps of 1000 km. Accordingly, readout on the display will also be in steps of 1000 km.
- When using the button pad on the scan tool, the number must be entered directly.
- If an incorrect value is entered adaptation function will be terminated and must be restarted.

CAUTION:
- Replacement instrument clusters calibrated in miles require input of distance reading in miles during adaptation (DO NOT convert to kilometers).
- Replacement instrument clusters calibrated in kilometers require input of distance reading in kilometers during adaptation.

- Press -> button.

Indicated on display:

Channel 2 Adaptation 1
Enter adaptation value XXXXX

- Enter required value via scan tool button pad, filling in initial spaces with "0"

Input value: e.g. 30000 km

Entry via keypad: 00030

Indicated on display (example only):

Channel 43 Adaptation 30 Q
Enter adaptation value 00030

- Press-Q- button to confirm input.

Indicated on display:

Channel 43 Adaptation 30 Q
max-value, oil in 1000 km < -1 3- >

- Press-Q- button to confirm input.

Indicated on display:

Channel 43 Adaptation 30 Q
Store changed value?

- Press-Q- button to confirm input.

Indicated on display:

Channel 43 Adaptation 30 ->
Changed value is stored

- Press -> button to terminate adaptation of maximum distance.