Information CAN-Bus, Adaptation

Information CAN-Bus, Adaptation

NOTE:
- The adaptation values of the table are input.
- Input values when replacing instrument cluster.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press -1- and -0- and confirm by pressing the -Q- button.

Indicated on display:

Rapid data transfer Q
10-Adaptation

- Press -Q- button to confirm input.

Indicated on display:

Adaptation
Insert channel number XX

- Press buttons -6- and -2- to access "channel 62".
- Press -Q- button to confirm input.

Indicated on display:

Channel 62 Adaptation 0 ->
<-1 3->

- Press -> button.

Indicated on display:

Channel 62 Adaptation O
Input adaptation value XXXXX

- Using table, input desired value using scan tool button pad, filling initial positions with "O".

Example input value: 5 (Navigation and Symphony radio)

Keypad input: 00005

Indicated on display (example only):

Channel 62 Adaptation 0 Q
Input adaptation value 00005

- Press -Q- button to confirm input.

Indicated on display:

Channel 62 Adaptation 5 Q
<-1 3->

- Press -Q- button to confirm input.

Indicated on display:

Channel 62 Adaptation 5 Q
Store changed value?

- Press -Q- button to confirm input.

Indicated on display:

Channel 62 Adaptation 5 ->
Changed value is stored

- Press -1L button to terminate adaptation for Information CAN-Bus.

Table:

Equipment Adaptation value

Radio (Symphony only) 1
Telephone 2
Navigation system 4
Telematics 8

Control modules which communicate over the Information CAN-Bus network have individual adaptation values. These values must be added together.

Example: Vehicle with Radio (Symphony) and Navigation System III (NS low)

- Adaptation value: Symphony Radio + Nav. = 1 + 4 = 5