Erase DTC Memory (Function 05), End Output (Function 06)

Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

Requirement
- DTC memory checked

Erase DTC Memory (Function 05)

- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer Q
DTC Memory is erased


- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:


Attention:
DTC Memory is not interrogated


- If the text shown opposite appears on the display, the test procedure has not been performed correctly.
- Follow the test procedure exactly:
- Check DTC memory.
- Repair any malfunctions and check DTC again.
- Erase DTC Memory.
- If for example, the ignition was switched off between checking and erasing DTC memory is not erased (check DTC memory once again).