Front Brake Caliper - 2FN, Servicing

Brake caliper 2FN, servicing





^ Install complete repair kit when performing service work.
^ New brake calipers are filled with brake fluid and pre-bled.
^ Apply thin coat of assembly paste G 052 150 A2 to brake cylinder, piston and seal.

1. Dust cap
^ Install on bleeder valve
2. Bleeder valve, 10 Nm
^ Grease lightly with assembly paste G 052 150 A2, before screwing in
3. Caps
^ Insert in mounting bushing
4. Guide pin, 25 Nm
5. Mounting bushing
^ Insert into brake caliper housing
6. Brake caliper housing
7. Brake carrier
^ Bolt onto brake caliper housing
8. Retaining spring
9. Seal
10. Piston
^ Apply thin coat of assembly paste G 052 150 A2 to piston before installing
11. Protective seal
^ Do not damage when inserting piston