Convertible Top Hydraulic Cylinder: Service and Repair

Hydraulic Cylinders, Removing And Installing

- Trim of center rear panel and side panel removed.







- Disengage hydraulic cylinder - 1 - at upper ball stud - 2 - with convertible top closed.
- Tighten ball studs - 2 - and - 5 - to 23 Nm when installing.
- Washer - 3 -.
- Main bearing - 4 - at convertible top.
- Rubber washer - 6 - must be pushed onto ball stud - 5 - before attaching hydraulic cylinder - 1 -.