Right Storage Compartment, Removing and Installing

Right Storage Compartment, Removing And Installing

Without navigation
- Remove rear panel side trim







- Remove bolts - 2 - (2x) of Bowden cable handle - 1 - for disengaging rear lid.







- Disengage Bowden cable - 2 - (in direction of arrow) from handle - 1 -.







- Pull nipple - 2 - of Bowden cable - 3 - from handle - 1 -.







- Remove screw - 4 - (1x).
- Tightening torque 1.5 Nm
- Remove clip - 2 -.
- Remove clip - 3 -.
- Remove storage compartment - 1 -.

5 - Expanding nut

With navigation
- Remove rear panel side trim







- Remove screws - 2 - (2x) of Bowden cable handle - 1 - for disengaging rear lid.







- Disengage Bowden cable - 2 - (in direction of arrow) from handle - 1 -.







- Pull nipple - 2 - of Bowden cable - 3 - from handle - 1 -.







- Remove bolts - 2 - (2x).
- Tightening torque 1.5 Nm
- Pull storage compartment - 1 - over tab - 5 - when removing.

3 - Expanding nut
4 - Navigation device