Transmission Mount: Service and Repair

Bonded rubber bushing for transmission support, pressing out and in (all wheel drive)





Fig. 1 Marking Installation position of bonded rubber bushing In transmission support
^ Use a felt-tip pen, for example, to mark installation position on transmission support (arrow -A-).





Fig. 2 Pressing bonded rubber bushing out of transmission support





Fig. 3 Pressing bonded rubber bushing Into transmission support
^ Position bonded rubber bushing so that one of the rubber knobs (arrow -B-) on refer to Fig. 1 (illustration N42-0214) is opposite the marking (arrow -A-).