Bonded Rubber Bushing For Crossmember, Pressing Out and Pressing In

Bonded rubber bushing for crossmember, pressing out and pressing in
Fig. 1 Mark Installation position of bonded rubber bushing In cross member





^ Mark installation position with a felt-tip pen, for example (arrows).





Fig. 2 Pressing bonded rubber bushing out of crossmember

Fig. 3 Pressing bonded rubber bushing into crossmember





^ Position bonded rubber bushing so that one of the rubber knobs -1- on refer to Fig. 1 (illustration N42-0225) is opposite the marking (arrow).