Shift Interlock Solenoid: Testing and Inspection

CVT A/T 01J

Shift Lock Solenoid -N110-, checking

Note: This test must be performed if the specified values in the voltage measurement are not reached.

Additional special tools and equipment





^ Connector test U V.A.G 1594 A

Test sequence
^ Remove cover for shift control mechanism.





^ Disconnect harness connector at Shift lock solenoid -N110 -A-.
^ Attach multimeter for resistance measurement between contacts -B-.
^ Specified value: 22.3 ± 1 Ohms
If the specified value is not reached:
^ Replace shift lock solenoid.