Bushings For Track Control Link, Replacing

Bushings for track control link, replacing
Special tools and equipment





^ 3301 installation tool
^ 3301/ 4 installation tool
^ 3346 installation tool
^ 3346/ 2 installation tool
^ 3346/ 3 installation tool
^ 3350/ 1 installation tool

Note:
^ When clamping aluminum links, use protective pads.





Fig. 1 Pull out Inside bushings





Fig. 2 Installed position of bushing
^ Installation marks on track control link and bushing edge run parallel to one another.





Fig. 3 Pull In Inside bushings
^ Insert bushing -A- in thrust piece (3346/1) to a depth of 3.2 mm.
^ Pull in bushing until it stops.





Fig. 4 Pull out outside bushing





Fig. 5 Pull In outside bushing
^ Insert bushing -A- in 3346/1 thrust piece to a depth of 8 mm.
^ Pull in bushing until it stops.