Center Seat Belt Buckle For Children's Bench, Removing and Installing

Center Seat Belt Buckle For Children's Bench, Removing And Installing

- Remove cover trim for seat belt buckle.
- Remove cover from spare wheel well.
- Remove cover from spare wheel.
- Remove lining from spare wheel well.







- Disengage spring - 2 - for belt buckle - 1 - on the appropriate side.
- Remove nut - 3 - on the appropriate side.
Tightening torque: 10 Nm (7 ft lb)
Use locking fluid D 000 600 A2 when installing.
- Push underlay (support) for luggage compartment floor mat to one side if necessary.