Emission Evaporative (EVAP) Canister, Removing and Installing

EVAP Canister, Removing And Installing

Removing
- Remove EVAP canister cover at bottom of spare wheel well.







- Remove hose connections -1 to 3- at vent lines.
- Remove sealing pieces above ventilation lines.
- Remove pin bolts (arrows) and remove EVAP canister.

Installing
Installation is the reverse of removal, noting the following:

NOTE: Secure all hose connections using hose clamps appropriate for the model type.

Tightening torques

Component Nm
EVAP canister to chassis 15
Cover for EVAP canister 10