Front Wheel Bearing, Servicing

Front wheel bearing, servicing





1. Wheel bearing housing
^ Note different suspension versions
^ Application
^ See Parts Supplier
2. Spherical cap bolts 80 Nm plus additional 90° turn
3. Bushing
4. Backing plate
5. Hex bolt, 10 Nm
6. Wheel hub
^ Pressing out refer to Fig. 1 and refer to Fig. 2
^ Pulling off bearing inner race refer to Fig. 3
^ Stepped design
^ Contact surface between rim/brake disc as well as brake disc/wheel hub must be free from rust, corrosion products and dirt.
^ Lightweight construction hub
7. Angular ball bearing
^ Pressing out 75 mm dia. refer to Fig. 1
^ Pressing out 82 mm dia. refer to Fig. 2
^ Pressing in 75 mm dia. refer to Fig. 5
^ Pressing in 82 mm dia. refer to Fig. 6
^ Pressing off bearing inner race refer to Fig. 3
^ Removing and installing with wheel bearing housing installed
^ Installation position:
- Larger inside diameter of wheel bearing faces wheel hub.
^ Pressing out and pressing in with wheel bearing housing installed