Front Fog Light Bulbs, Removing and Installing

Fog Light Bulbs, Replacing


Fog lights - threaded cover:

Removing







- Remove Phillips head bolts -2- at housing cover.
- Disengage wire clamp -1- and remove bulb from housing.







- Disconnect electrical harness connector -A- of lamp from wire connector in housing cover.

Installing
Installation is reverse of removal, noting the following:
- Insert new bulb into housing, do not touch glass cone with bare hands.
- Secure bulb using wire clamp.
- Re-connect harness connector and close housing cover.

Fog light - cover with bayonet connection

Removing







- Remove cover by rotating counterclockwise.







- Disengage wire clamp -1- and remove bulb from housing.
- Disconnect electrical harness connector -2-.

Installing
Installation is reverse of removal, noting the following:
- Insert new bulb into housing, do not touch glass cone with bare hands.
- Secure cover by turning clockwise.