Glove Box Lamp: Service and Repair

Glove Compartment Lamp, Removing and Installing


NOTE:
- Remove glove compartment lamp to replace bulb.
- Bulb for glove compartment lamp: 12V , 5W


Removing







- Using a flat screwdriver, press in retaining tab -2- and lever out glove compartment lamp -1-.
- Disconnect electrical harness connectors -3-.
- Remove bulb from bulb socket at rear of glove compartment lamp.

Installing
Installation is reverse of removal, noting the following:
- Connect harness connectors -3- first.
- Insert luggage compartment lamp -1- into opening and engage on opposite side.