Water Pump: Service and Repair

Coolant pump, removing and installing

Note:
- Always replace gaskets and seals.





1 Coolant pump
2 Gasket
3 10 Nm (7 ft. lbs.)

Removing:
- Remove toothed belt, Refer to Engine; Service and Repair.

Note: The vibration damper does not have to be unbolted or removed.

- Remove toothed belt tensioning roller.





- Remove coolant pump (9 Torx bolts).

Installing
- Install coolant pump (9 Torx bolts).
- Install toothed belt tensioning roller.
- Install toothed belt, Refer to Engine; Service and Repair.

Tightening torques
Coolant Pump 14 Nm (10 ft. lbs.)
Toothed Belt Tensioning Roller 45 Nm (33 ft. lbs.)