Brake Pedal, Assembly Overview

Brake pedal, assembly overview

CAUTION: Brake pedal travel must not be restricted by additional floor coverings.





1. Bracket
2. Pivot pin for clutch and brake pedals
^ Installation position: groove (arrow) faces clutch pedal
3. Locking clip
4. Hex socket-head bolt, 25 Nm
5. Brake pedal
^ Installed on pin
6. Clutch pedal
7. Pin
8. Locking clip
9. Clutch master cylinder
^ Note different versions (plastic or aluminum)
10. Hex socket-head bolt, 20Nm
^ Different versions depending on master cylinder (plastic or aluminum)
11. Mount
^ Install in mounting bracket with over-center spring
12. Over-center spring
^ Allocation - parts catalog
^ Remove and install together with clutch pedal
13. Socket-head bolt, 5Nm
^ Secures pivot pin for clutch and brake pedal
14. Seal
^ Must not be removed on plastic master cylinders
15. Torx bolt, 25 Nm
^ Also secures master brake cylinder and brake booster