Bowden Cable, Removing and Installing

Bowden Cable, Removing And Installing







1 - Cover
2 - Bowden cable

Removing
- Remove seat bench cover.
- Pry green sleeve - A - out of metal bracket.
- Pull Bowden cable - 2 - out at metal pin - B - until the Bowden cable - 2 - can be removed from bracket over the wire.







- Pry green sleeve - C - out of metal bracket.
- Unclip Bowden cable - 2 - from bracket D-under cushion.
- Pull out Bowden cable - 2 -.

Installing
- Installation is the reverse of removal.