Roof Grab Handle, Removing and Installing (From Calendar Week 36.02)

Roof Grab Handle, Removing And Installing (From Calendar Week 36.02)







1 - Deformation element
2 - Screws (2x).
- Tightening torque: 3.5 Nm
3 - Trim
4 - Roof grab handle
- Open cover - 6 -.
- Remove screws - 5 - (2x).
- Remove roof grab handle - 4 -.







5 - Screws (2x).
- Tightening torque: 3.5 Nm

- Self-locking
- Always replace
- Always clean threaded holes for screws (e.g. using a thread cutter)
- For loose (threaded) inserts, tighten inserts using pliers
6 - Cover