Headlight Washer System Spray Jets, Remove and Install

Headlight Washer System Spray Jets, Removing And Installing

Removing







- Pull spray jet covers upward at bumper and carefully disengage mounts -arrow-.
- Remove the respective headlight.







- Remove washer fluid hose -3- (press release button).
- Unscrew bolts -1- and -2- and remove spray jet.


NOTE: Illustration is shown with bumper removed.


Installing
Installation is reverse of removal, paying attention to the following:
- Install headlight.

Tightening torque
Spray jet to bumper: 3 Nm