Window Regulator, Removing and Installing

Window regulator, removing and installing

NOTE: Position of adjusting screws and nuts should be marked before loosening.

Removing
- Remove door trim.
- Mark position of screws and nuts.
- Run window all the way up.
- Remove window.
- Remove window regulator motor.
- Remove bass speaker.
- Remove rearview mirror.







- Remove bolts - 1 -, - 3 - and - 4 -.
- Unclip cables.
- Tip rear lower linkage - 5 - forward.
- Tip front upper linkage - 2 - back.
- Remove window regulator from door.

Installing
Installation is reverse of removal.
- After installation, perform basic setting.