Shift Interlock Solenoid: Testing and Inspection

Shift Lock Solenoid -N11O-, checking

Note: This test must be performed if the specified values in the voltage measurement are not reached.





Additional special tools and equipment
- Connector test kit VAG 1594 A

Test sequence
- Remove cover for shift control mechanism





- Disconnect harness connector at Shift lock solenoid -N110 -A-.
- Attach multimeter for resistance measurement between contacts -B-.
^ Specified value: 22.3 ± 1 ohms

If the specified value is not reached
- Replace the shift lock solenoid.