6 SPD. M/T 01E

Pedal cluster assembly, overview





1 - Bracket
^ Removing and installing:
2 - Pivot pin for clutch and brake pedal
3 - Securing clip
4 - Hex socket-head bolt - 25 Nm
5 - Brake pedal
^ Maintenance-free mount, do not grease
6 - Clutch Vacuum Vent Valve Switch -F36-
^ In order to assure sufficiently secure installation, switch must not be installed more than once
7 - Hex socket-head bolt - 5 Nm
^ Secures clutch and brake pedal pivot pin
8 - Clutch pedal
^ Removing and installing
9 -Securing clip
10 - Mount
^ Removing and installing
11 -Hex socket-head bolt - 20 Nm
12 - Master cylinder
^ Removing and installing
^ Seal -arrow- must not be removed
13 - Over-center spring
^ Black side faces clutch pedal
^ Removing and installing
^ Allocation
go to Parts Catalog
14 - Clutch Pedal Position (CPP) Switch -F194- (interlock switch)
^ In order to assure sufficiently secure installation, switch must not be installed more than once
15 - TORX-screw - 25 Nm
^ For fastening brake master cylinder/brake servo to mounting bracket