5 SPD. M/T 012/01W FWD

Pedal cluster assembly, overview





1 - Mounting bracket
^ Removing and installing
2 - Fulcrum pin for clutch and brake pedal
3 - Fastener
4 - Hex socket-head bolt - 25 Nm
5 - Brake pedal
^ Mounting is maintenance-free, do not grease
6 - Clutch pedal switch
^ Can only be installed one time
7 - Hex socket-head bolt - 5 Nm
^ For securing pivot pins for clutch and brake pedal
8 - Clutch pedal
^ Removing and installing
9 - Fastener
10 - Retainer
^ Removing and installing
11 - Hex socket-head bolt - 20 Nm
12 - Master cylinder
^ Removing and installing
^ Seal -arrow- must not be removed
13 - Over-center spring
^ Black end points toward clutch pedal
^ Removing and installing
^ Allocation
go to Parts list
14 - Clutch Pedal Position (CPP) Switch -F194-
^ Can only be installed one time
15 - Torx bolt - 25 Nm
^ For securing brake master cylinder/brake servo to mounting bracket