Torque Converter Oil Seal, Replacing

5 Spd. A/T 01V

Torque converter oil seal, replacing

Special tools and equipment





^ VVV681 extractor lever





^ 3295 thrust piece

Removing
- Removing transmission.
- Secure transmission to assembly stand.





^ Insert VVV681 extractor lever directly behind the sealing lip of the sealing ring, so that the contact ring which is behind it is not damaged.

Installing
- Insert contact ring.
- Coat outer circumference and sealing lips of sealing ring with ATF.
^ Installation position: The open side of the sealing ring faces the transmission.





- Using 3295 thrust piece, drive in sealing ring for torque converter up to thrust piece stop.