Fluid Pan: Service and Repair

5 Spd. A/T 01V
Oil pan, removing and installing

Special tools and equipment





- VAG 1306 drip tray

Removing





- Remove noise insulation panel (arrows).
- Place VAG1 306 drip tray under transmission.





- Remove ATF drain plug (arrow) and drain ATF.
- Loosen oil pan bolts diagonally and remove oil pan.

Installing
Installation is reverse of removal, noting the following:
- Clean all 4 magnets in oil pan recesses. Ensure full surface contact of the magnets on the oil pan.
- Replace gaskets.

Note: Drain plug and oil seal must both be replaced.

- Fill up ATF.





Tightening torques