Light Bulb For High Beam (Xenon) Headlights, Replacing

Light Bulb For High Beam, Replacing

Caution high voltage!
Make sure to disconnect battery Ground (GND) strap before performing work on parts of High intensity gas discharge (xenon) headlights marked with yellow high voltage symbols.

Removing
- Remove headlight.
- Remove housing cover from headlight housing.
- Disconnect electrical harness connector at igniter for gas discharge lamp.







- Rotate light bulb counterclockwise -arrow- and remove it from headlight housing.
- Disconnect electrical harness connector at bulb.

Installing
Installation is reverse of removal, noting the following:
- Do not touch glass portion with bare hands.
- Secure light bulb by turning clockwise.
- Secure housing cover using wire clamp.
- Install headlight.