Glove Box Lamp: Service and Repair

Glove Box Light, Removing And Installing


NOTE:
- Remove glove box light to replace bulb.
- Bulb for glove box light : 12 V, 5 W


Removing







- Using a flat screwdriver, press in retaining tab -1- and pry out glove box light -2-.
- Unplug connector -3-.
- Remove bulb from socket on back side of glove box light.

Installing
Installation is reverse of removal, paying attention to the following:
- Plug in connector.
- Insert glove box light into opening and engage on opposite side.