Diagram 19/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Garage Door Opener Control Head, Control module with indicator unit in instrument panel insert





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E284 - Garage Door Opener Control Head Locations

J285 - Control module with indicator unit in instrument panel insert Common Modules Overview

J530 - Garage Door Opener Control Module Locations

T4k - 4-Pin Connector, black, near front bumper

T4y - 4-Pin Connector, black, on Garage Door Opener Control Head

T10i - 10-Pin Connector, blue, connector station A-pillar, left

T10x - 10-Pin Connector, black, near front bumper

(12) - Ground connection, in engine compartment, left Locations

(179) - Ground connection, in left headlight wiring harness

(345) - Ground Connection (in bumper wiring harness)

(A146) - Comfort System High-bus Connection (in instrument panel wiring harness)

(A147) - Comfort System Low-bus Connection (in instrument panel wiring harness)

(A175) - Connection (58s), (in instrument panel wiring harness)

* - discontinued from 2004 m. y.

** - valid from 2004 m. y.

Previous Diagram 19/3 (Tracks 15-28)