Front Bumper Cover / Fascia: Adjustments

Bumper cover (up to model year 2005), adjusting to hood







- Position bumper cover, clip in side flanks - arrow - and secure with bolts - 8 -.
- Loosely install bolt - 3 -.
- Tighten bolts - 2 -, - 4 -, - 5 -, - 6 - and - 7 -.

NOTE: Note different torque values.

- Close hood.
- Check projection and recess of bumper cover to hood.
- If OK, tighten all bolts to torque.
- If not OK, open hood.
- Loosen bolt(s) - 2 - and/or - 4 -, correct top of bumper cover accordingly and re-tighten bolt to torque.
- Tighten bolt - 3 -.
2 - Screw (6 Nm)
3 - Screw (6 Nm)
4 - Screw (6 Nm)
5 - Screw (3 Nm)
6 - Screw (3 Nm)
7 - Screw (3 Nm)