CD Changer: Service and Repair

CD Changer, Removing And Installing

Special Tools and Equipment







- T10057 radio removal tool

Removing
- Open glove compartment.







- Insert two hooks of T10057 radio removal tool into the front of the CD changer.
- Top L - left top
- Top R - right top
- Pull the CD changer out of its installation slot.
- Detach connector.
- Pull out the release tool from the CD changer - to do this, press in the locking tabs on the CD changer.

Installing
- Plug in the connector.
- Slide the CD changer into the installation slot until it engages.
- After installation, it is essential that the wiring is checked.