Rules For Cleanliness

Rules of cleanliness
When working on turbocharger, pay careful attention to the following "5 rules":
^ Carefully clean all joints and adjacent areas before disconnecting.
^ Place parts removed on a clean surface and cover them over. Do not use fluffy cloths.
^ Carefully cover or seal opened components if repairs are not to be performed immediately.
^ Only install clean components: Do not remove replacement parts from wrapping until immediately prior to installation. Do not use parts that have been stored loose (e.g. in tool boxes).
^ When system is open: Do not work with compressed air if at all possible. Do not move vehicle unless absolutely necessary.