Convertible Top Upholstery, Removing and Installing

Convertible top upholstery, removing and installing







Removing
- Remove convertible top headliner.
- Remove convertible top cover.
- Bring convertible top into center position.







- Remove molding band - 1 - and remove convertible top upholstery from front rail groove - 2 -.







- Remove convertible top upholstery from adhesive tape on main guide - 1 -.

NOTE: The double-sided tape can be reused if in good condition.

- Remove bolt from back end of convertible top upholstery in bracket.
- Slide convertible top upholstery forward out of bracket upper groove - 2 -.
- Pull convertible top upholstery to side and out of rails.

Installing
Installation of the convertible top upholstery is the reverse of removal.

NOTE:
- Ensure all convertible top components are positioned and function properly.
- Perform function test.