Code Control Module (Function 07)

NOTE:
- Control module with part no. 8N0 906 018 C was equipped with "06500" as a permanent code and cannot be re - coded.
- Control module with part no. 8N0 906 018 K was equipped with "06550" as a permanent code and cannot be re - coded.


- Connect VAS5051 vehicle diagnostic, testing and information system or VAG 1551 scan tool and select control module for engine electronics using "address word" 01.
- Ignition must remain switched on for this.

When indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons "07" for the function "Code Control Module" and press Q button to confirm input.

When indicated on display


Code Control Module Q
Input code number XXXXX (0-32000)


- Input control module coding according to Coding Table.

Clarification of coding







VAG 1551 Scan Tool display indicates control module identification, e.g.:


8N0905018C 1.81 R4/5VT G 0005 ->
Coding 06500 WSC 12345


- Press -> button.

Indicated on display (function selection):


Rapid data transfer HELP
Select function XX

Coding Table: