Ignition System: Service Precautions
Safety Precautions
WARNING:
To reduce the risk of personal injury and/or damage to the fuel injection and ignition system, always observe the following:
- Only disconnect and reconnect wires for injection and ignition system, including test leads, when ignition is turned off.
- If engine is to be cranked at starting RPM without starting (e.g. for compression testing), disconnect connector from ignition coils and from fuel injectors.
- It is possible that the control module will recognize a malfunction and store a DTC during some tests. After completing all tests and repairs, DTC memory should therefore be checked and erased if necessary.
- Always switch ignition off before cleaning engine.
- The battery should only be disconnected and reconnected when the ignition is turned off, since otherwise the Engine Control Module (ECM) can be damaged.