Information

The tables in this section list the malfunctions recognized by the A/C clutch control module -J153- and the DTCs displayed and/or printed on the VAG1551 scan tool. When you are ready to view these tables press the back button to go to previous menu.

- Before replacing the A/C clutch control module -J153-, check battery positive voltage (B+) and Ground (GND) connections to terminals 30, 75, and 31 according to the wiring diagrams, and repair as necessary.
- When a malfunction has been recognized, first check wiring and connections to that component for open or short circuits according to the wiring diagrams.

NOTE:
- DTC memory is erased each time ignition is switched off
- Sporadic malfunctions are identified with an "/SP" on the right side of the VAG1551 scan tool display. Malfunctions not marked with "/SP" are not stored, but are displayed for as long as they are recognized.
- The 5-digit DTC is not displayed on the VAG1551 scan tool, but only printed out using the printer
- Text marked in the table with an asterisk (*) will be displayed in addition to the appropriate component or information.